[提问] 放MOD後按應用 遊戲直接出現錯誤關閉

我只放這些 MOD  但是要分別的MOD進去
到遊戲裡編輯全部勾選後按應用遊戲直接出現錯誤關閉,要怎麼辦?

就这几个、先去除所有、然后每个试一下就知、也花不了很多时间！

查看，我的文档下，欧洲卡车模拟2的game_log文件，找到最后几行，开头信息为ERROR的，即为崩溃信息。你可以将其复制到这里，我可以帮你解决

<ERROR> Current profile not set.
<ERROR> Failed to store profile config

添加任何的mod都會這樣,不知道為什麼

剛剛要買新托車 iveco 又直接關閉遊戲
00:00:24.550 : <ERROR> Cylinder volume of 'dxi13_2100.renault.magnum.engine' engine should be higher than 6! It is set to 0.00.
00:00:24.599 : <ERROR> Cylinder volume of 'dxi11_2100.renault.premium.engine' engine should be higher than 6! It is set to 0.00.
00:00:24.660 : <ERROR> [unit] File '/def/vehicle/truck/renault.premium/transmission/24_speed.sii', line 3:
00:00:24.660 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:24.660 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/renault.premium/transmission/24_speed.sii)
00:00:24.729 : <ERROR> [unit] File '/def/vehicle/truck/scania.r/transmission/24_speed.sii', line 3:
00:00:24.729 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:24.729 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/scania.r/transmission/24_speed.sii)
00:00:24.739 : <ERROR> Cylinder volume of 'd16g2100.volvo.fh16.engine' engine should be higher than 6! It is set to 0.00.
00:00:24.787 : <ERROR> [unit] File '/def/vehicle/truck/volvo.fh16/transmission/24_speed.sii', line 3:
00:00:24.787 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:24.787 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/volvo.fh16/transmission/24_speed.sii)
00:00:24.844 : <ERROR> [unit] File '/def/vehicle/truck/volvo.fh16_2012/transmission/24_speed.sii', line 3:
00:00:24.844 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:24.844 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/volvo.fh16_2012/transmission/24_speed.sii)
00:00:24.855 : <ERROR> Cylinder volume of 'mx2100.daf.xf.engine' engine should be higher than 6! It is set to 0.00.
00:00:24.956 : <ERROR> [unit] File '/def/vehicle/truck/daf.xf/transmission/24_speed.sii', line 3:
00:00:24.957 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:24.957 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/daf.xf/transmission/24_speed.sii)
00:00:25.018 : <ERROR> [unit] File '/def/vehicle/truck/iveco.hiway/transmission/24_speed.sii', line 3:
00:00:25.018 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:25.018 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/iveco.hiway/transmission/24_speed.sii)
00:00:25.030 : <ERROR> Cylinder volume of 'cur13_2100.iveco.stralis.engine' engine should be higher than 6! It is set to 0.00.
00:00:25.096 : <ERROR> [unit] File '/def/vehicle/truck/iveco.stralis/transmission/24_speed.sii', line 3:
00:00:25.096 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:25.096 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/iveco.stralis/transmission/24_speed.sii)
00:00:25.111 : <ERROR> Cylinder volume of 'd2868_2100.man.tgx.engine' engine should be higher than 6! It is set to 0.00.
00:00:25.215 : <ERROR> [unit] File '/def/vehicle/truck/man.tgx/transmission/24_speed.sii', line 3:
00:00:25.215 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:25.215 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/man.tgx/transmission/24_speed.sii)
00:00:25.232 : <ERROR> Cylinder volume of '1865ls.mercedes.actros.engine' engine should be higher than 6! It is set to 0.00.
00:00:25.320 : <ERROR> [unit] File '/def/vehicle/truck/mercedes.actros/transmission/24_speed.sii', line 3:
00:00:25.321 : <ERROR> [unit] The unit name '24_speed.scania.r.transmission' is already taken by an existing unit (of type 'accessory_transmission_data').
00:00:25.321 : <ERROR> load_unit() - Failed to load units from file (/def/vehicle/truck/mercedes.actros/transmission/24_speed.sii)

樓主你用哪一版主程式啊？

下載區的置頂這個版本
本版置頂  [下載]         欧洲卡车模拟2 v1.7.1s集成2DLC 3DM免安装中文版

各位大大用的是哪一版的可以推薦嘛,想換別版試看看了...

你真的要依照2F的建議，一個一個陸續放進去測試。
先放一個，跑一跑，ok了，再加入第二個。。。
依此類推。

另外，你沒掛載地圖mod吧？
你先把24那個移除掉，開新檔試試

[ 本帖最後由 passugg 於 2013-12-15 21:25 編輯 ]

沒用地圖mod..只能試試看了