【版本】：1.29
【介绍】：
引用框:
机译：
更新日志3.1给底特律发动机增加颜色
边框灯作为附件。
天线和镜杆上的电线。
从内部的杆的几何形状现在对应于外部模型。
名牌卧铺
有窗的睡窗，作为附件
重复默认保险杠，增加雾灯。
各种修正和改进
缺省SCS模型的完成与修正。
——由于驾驶室3种类型：默认（多用直升机轨枕72英寸），
一个窗口（多用直升机轨枕72英寸）和一个扩大的工厂（工作室轨枕86英寸）。
-机舱的默认日期，和他们的框架，拆除。
- 3种类型的睡袋在室内，对应的小屋。
*外部模型内部的HD内部更换。
-挡风玻璃开口的几何形状改变了，它与外部模型形成了对应关系，
遮阳板的固定点也与外部模型相对应。
锋面较垂直，对应于外部模式。
* 3帧（265英寸），3帧（275英寸），1帧（285英寸），1帧（295英寸），1帧（305英寸）。
*前轮轨道减少，根据真正的轨道。
*步骤工具箱，auxualy功率（odd_fellow），添加到附件部分
** - 4个全新的保险杠（20英寸），有能力安装驱动板。
*增加了3 c-bi站内部，配置一个单独的槽materials.station。
我在The Saloon夜店加了3个变速杆，
一个股和第二长，有可能调整。
*重新配置几乎所有的材料和纹理的卡车和内饰。
现在在镜子的栏杆上可以看到天线了。
-根据实际几何形状将引擎盖的格栅钉上（默认是垂直的）。
-在引擎盖上做了一个亮红色的铭牌。
-我减少了10%在遮光罩上的镜子的大小。
-悬挂使它在所有的车架上更加柔软，现在骑更多的秋千是很好的，默认是相当的橡木。
- perenastroil相机在机舱，FOV 67和其他参数的旋转头。
它增加了相机点设置的范围，不可能在默认情况下安装摄像机。
*替换默认模式的收音机，从odd_fellow模型，设置材料。无线电广播。
-我重新设计了乐器的光辉。
*在沙龙专属烟设备的灯都是由瓦蓝色和计算机。
** -标准沙龙，黄色和库存计算机
*添加从SISL包附件锚点（我的包的版本是随着这个MOD）
* -发动机现在自己油漆时，选择发动机本身。
-使车头灯材料与客舱玻璃分开。
-调整玻璃在客舱和外部模型上的反射。
*保险杠上的一个盘子，你可以在那里写文字。
*移动超大保险杠的旗子。
＊阀盖的末端比预设的更圆。
** -添加7个变种烧烤罩
*添加5遮阳帽
* *里希鲍姆音响引擎改编
**排气烟。
**在发廊灯，接通按钮“Щ”
**——而且更多…
*许多安装部件与某些细节捆绑在一起，不会对其他部件起作用。
链接1卡车
链接2：SiSL的pack_compatible
链接3：为W900 big_bob版3里希鲍姆声音
複製內容到剪貼板
原始碼:
Changelog 3.1
added color to Detroit engines
bezel headlight as an accessory.
wires for antennas and mirrors on the mirrors rods.
the geometry of the bars from the interior now corresponds to the external model.
real nameplate studio sleeper
Sleeper window with a window, as an accessory
Duplicated the default bumper, adding anti-fog lights.
various fixes and improvements
completion and correction of the default SCS model.
--As a result of 3 types of cab: default (Aerocab Sleeper 72 inches),
with a window (Aerocab Sleeper 72 inches) and an enlarged factory (Studio Sleeper 86 inches).
- the default day of the cabin, and the frames for them, removed.
- 3 types of sleeping bags in the interior, corresponding to the cabins.
* - Interiors in external models on HD internal are replaced.
- The geometry of the opening of the windshield was changed, it was brought into correspondence with the external model,
The fixing point of the visor also corresponds to the external model.
The frontal stands are more vertical, correspond to the external model
* - 3 frames (265 inches), 3 frames (275 inches), 1 frame (285 inches), 1 frame (295 inches), 1 frame (305 inches).
* - the front wheel track is reduced, in accordance with the real one.
* - steps, toolbox, auxualy power (odd_fellow), added to the accessory section
** - 4 completely new bumpers (20 inches) with the ability to install driver plate.
* - Added 3 C-bi stations to the interior, reconfigured the materials.station with a separate slot.
- I added 3 shift levers to the saloon,
one stock and the second long, with the possibility of tuning.
* - Reconfigured almost all materials and textures on the truck and in the interior.
--It is now visible the antenna on the bars of the mirrors.
- Nailed the grille of the hood in accordance with the real geometry (on default it is vertical).
- Made a brighter red nameplate on the hood.
- I reduced by 10 percent the size of the mirrors on the hood.
- The suspension made it softer on all the frames, now it's nice to ride more swinging, the default is quite oak.
- Perenastroil camera in the cabin, fov 67 and other parameters of turning the head.
--It increased the range of the camera point setting, it was not possible to install the camera by the default on the torpedo.
* - Replaced the default model of the radio, on the model from odd_fellow, set up the materials. radio by a separate slot.
- I reprogrammed the glow of the instruments.
* - In the salons Exclusive and Smoke the lights of the devices are blue and computer by PIVA.
** - In standard salon, yellow and stock computer
** - Added anchor points for accessory from the SISL package (my version of the pack goes along with this mod)
* - The motor is now painted by itself when choosing the engine itself.
- Made the headlights material separate from the glass of the cabin.
- Adjusted the reflection of the glass in the cabin and on the exterior model.
* - a plate on the bumper where you can write text.
* - moved the flags of the oversized bumper.
* - the ends of the bonnet wings are more rounded than the default.
** - add 7 variant grill hood
** - add 5 sunshield visors
** - Kriechbaum sound & engines adapted
** - exhaust smoke.
** - the light in the salon, is turned on by the button "Щ"
**--and much more...
* - Many installed parts are tied to certain details and will not be active on others.
Link 1 Truck
Link 2: SiSL's Pack_Compatible
Link 3: Sound for w900 Big_Bob edition 3.0 Kriechbaum 【版权】：
Big_Bob
【截图】：
声明：本人只是单纯搬运的，有问题，问也不懂，十分抱歉。
请文明回帖，如果嫌麻烦可以复制 “感谢楼主的分享”
但不可灌水，违者将有可能被封号。
【地址】：430m
回帖后才可看到本帖隐藏内容。VIP贵宾免回帖。
乱打内容会被封号。可粘贴一句“感谢楼主分享”
English
门户网
简简切换
