【适用版本】：ETS2/ATS 1.4X-1.46（经测试和欧卡2通用，1.46以下版本未测试，理论上支持1.38之后的任意版本）
【介绍】：
複製內容到剪貼板
原始碼:
WHAT THIS MOD DOES
This mod involves only 2 files (physics.sii and physics_interior_camera.sii) which only deal with the physics of the player truck, so it is a very safe mod as it does not touch anything else in the game. You can disable this mod anytime without damaging your trucks or saves.
This mod is carefully created by taking realism into account, trying not to overdo or exaggerate the truck behavior. Therefore, only a few changes (but significant) have been made to the vanilla physics to encourage the truck to react to certain road conditions more naturally and realistically.
On the smooth road surface of SCS the changes might not be very obvious. But when the truck runs over a bumper or rough road surface, the changes will be very obvious to you. But do not expect to see any wild swinging or rocking like some other physics mods. This mod is ideal for the players who prefer realism and also stay vanilla as much as possible at the same time.
This mod has reached the limitation of realism the game can offer in terms of physics. Because as we all know that most parts of the road surface in the game are unrealistically smooth as glass. So the truck cannot tilt or swing on such a smooth surface, unless a "fake vehicle tilting" system is applied like in the Fernbus Simulator game of TML Studio. Any more pressure to the truck by a mod would only exaggerate the behavior of the truck.
This mod ensures that when the road condition permits, your truck will behave as it should.
SETTING GUIDE
1. Place this mod higher than any truck mods (if any). This mod is universal and compatible with all SCS trucks and all mod trucks.
2. In-game option menu:
(These are optional, not mandatory, but to get the best from this mod and for realism you should follow)
2.1 Enable camera physics and max it (all the way to the right).
2.2 Both truck & cabin suspensions/stability should be lowest (all the way to the left).
2.3 Trailor Stability is up to you. But 50% is recommended for realism (mid way).
For 900 Degree Wheel users only:
2.4 Steering Sensitivity = 10%
2.5 Steering Non-Linearity = 90%
(The steering setting has nothing to do with the mod, it's just a general recommendation. This mod uses the vanilla steering parameter.)
GAME PATCH / COMPATIBILITY
1. This mod is made from 1.38 but it should be compatible with some early and future patches also. Use it until the game rejects it or otherwise crashes. If SCS says nothing about physics in future patches, it should still work well.
2. This mod has its own built-in suspension seat. But it is also compatible with any of my Air Ride mods. The Air Ride mods must be higher than this mod.
3. This mod is compatible with all SCS trucks and all mod trucks. (must be higher than truck mods) 引用框:
这个 MOD的作用
这个 MOD 只涉及 2 个文件（physics.sii 和 physics_interior_camera.sii），它们只处理玩家卡车的物理特性，所以它是一个非常安全的 mod因为它不会触及游戏中的任何其他内容。您可以随时禁用此模组，而不会损坏您的卡车或储蓄。
这个 mod 是通过考虑现实主义精心创建的，尽量不要过度或夸大卡车的行为。因此，仅对原版物理学进行了少量更改（但意义重大），以鼓励卡车更自然、更真实地对某些路况做出反应。
在南海平坦的路面上，变化可能不是很明显。但是当卡车驶过保险杠或崎岖不平的路面时，变化对你来说会非常明显。但是不要指望像其他一些物理模组那样看到任何疯狂的摆动或摇摆。这个模组非常适合喜欢现实主义并同时尽可能保持原版的玩家。
这个模组已经达到了游戏在物理方面可以提供的真实感的极限。因为众所周知，游戏中的大部分路面都像玻璃一样光滑得不切实际。因此卡车不能在如此光滑的表面上倾斜或摆动，除非像 TML Studio 的 Fernbus Simulator 游戏中那样应用“假车辆倾斜”系统。改装车对卡车施加的任何压力只会夸大卡车的行为。
此模组可确保在路况允许时，您的卡车将正常运行。
设置指南
1. 将此模块放置在高于任何卡车模块（如果有）的位置。这个模组是通用的，兼容所有 SCS 卡车和所有模组卡车。
2.游戏内选项菜单：
（这些是可选的，不是强制性的，但是为了从这个 mod 中获得最好的效果，并且为了真实性，你应该遵循）
2.1 启用相机物理并最大化它（一直到右边-图示设置3中查看）。
2.2 卡车和客舱的悬架/稳定性应该是最低的（一直到左边-图示设置2中查看）。
2.3 拖车稳定性由您决定。但建议将 50% 用于现实主义（中间-图示设置1中查看）。
仅限 900 度方向盘用户设置：
2.4 转向灵敏度 = 10%
2.5 非线性转向 = 90%
1. 这个模组是从 1.38 开始制作的，但它也应该与一些早期和未来的补丁兼容。使用它直到游戏拒绝它或以其他方式崩溃。如果 SCS 在未来的补丁中只字不提物理，它应该仍然可以正常工作。
2. 本模组自带悬浮座椅。但它也与我的任何 Air Ride 模组兼容。Air Ride 模组排序必须高于此模组。
3. 此模组兼容所有 SCS 卡车和所有模组卡车。（排序必须高于卡车模组）
【版权】：
Momo
【截图】：
【下载】：
steam创意工坊：
https://steamcommunity.com/sharedfiles/filedetails/?id=2175896743
本地下载
回帖后才可看到本帖隐藏内容。VIP贵宾免回帖。
乱打内容会被封号。可粘贴一句“感谢楼主分享”
[
本帖最后由 huysk 于 2022-12-12 13:02 编辑 ]
English
门户网
简简切换
